ICC ANSI A117.1-2003 PDF
December 22, 2019 | by admin
Trademarks: “ICC,” the International Code Council logo and “Accessible and Usable Buildings and Facilities (ICC/ANSI Al )” are trademarks of the. This Accessible and Usable Buildings and Facilities (ICC Al) is a The edition of ANSI Standard A presented the first criteria for accessibil. ICC/ANSI A Accessible and Useable Buildings and Facilities The specifications in this standard make sites facilities buildings and elements.
|Published (Last):||13 December 2013|
|PDF File Size:||7.73 Mb|
|ePub File Size:||9.91 Mb|
|Price:||Free* [*Free Regsitration Required]|
Objects beneath hall call buttons shall protrude 1 inch 25 mm maximum. Signs at elevator hoistways shall comply with Section At least one of the active leaves of doorways with two leaves shall comply with Sections A xnsi floor space com- plying with Sectionpositioned for a forward approach to the drinking fountain, shall be provided.
The telephone handset cord shall be 29 inches mm minimum in length. Curb a117.1-20003 shall be located or protected to prevent their obstruction by parked vehicles. Building Blocks Chapter 3.
Space extend- ing greater than 6 inches 1 50 mm beyond the xnsi knee clearance at 9 inches mm above the floor shall not be considered toe clear- ance. Water supply and drainpipes under lavatories and sinks shall be insulated or otherwise configured to protect against contact.
Controls shall be located within one of the reach ranges specified in Section As such, this foreword may contain material that has not been subjected to public review or a consensus process. Grab bars for transfer type showers shall comply with Section The administrative authority shall specify, in separate scoping provisions, the extent to which these technical criteria apply.
This American National Standard may be revised or withdrawn at any time. If a clear floor space is in an alcove or otherwise confined on all or part of three sides, additional maneuvering clearances complying with Sections Shelves shall be andi inches mm minimum and 48 inches mm maximum above the floor. Where such island or cut-through median is xnsi than 48 inches mm in depth, a b Fig.
The visible indication shall extinguish when snsi car arrives at the designated floor. Describes an object that can be perceived using the sense of touch.
TTYs required at a public pay z117.1-2003 shall be permanently affixed within, or adjacent to, the telephone enclosure. Buttons shall be arranged with numbers in ascending order. An entry 60 inches mm minimum in width shall be pro- vided.
Full text of “ANSI A (): Accessible and Usable Buildings and Facilities”
Plumbing elements and facilities required to be accessible by scoping a117.1–2003 adopted by the administrative authority shall com- ply with the annsi provisions of Chapter 6. Water closets located in ambulatory acces- sible toilet compartments specified in Section The shelf shall be capable of accommodating a TTY and shall have a vertical clearance 6 inches mm mini- mum in height above the area where the TTY is placed. Side wall grab bars complying with Section The standards listed in Section V 2 max Fig.
Where two adjacent wheelchair spaces are aansi, each wheelchair space shall be 33 inches mm mini- mum in width. A vertical grab bar 18 inches mm minimum in length shall be provided on the control end wall 3 inches 75 mm minimum to 6 inches mm maximum above the horizontal grab bar, and 4 inches 1 00 mm maximum inward from the front edge of the shower. The clear floor space shall be centered on the drinking fountain. The centerline of the water closet shall be 12 inches mm minimum to 18 inches mm maximum from the a1171-2003 wall or parti- tion.
Nosings that project beyond risers shall have the underside of the leading edge curved or bev- eled.
ANSI A117.1 (2003): Accessible and Usable Buildings and Facilities
Scoping General This standard provides technical criteria for making sites, facilities, buildings, and elements accessible. Where separate s117.1-2003 charac- ters and visual characters with the same infor- mation are provided, tactile characters are not required to have nonglare finish or to contrast with their background.
Distance between two hinged or pivoted doors in series shall be 48 inches mm minimum plus the width of any door swinging into the space. Incre- mental volume controls shall provide at least one intermediate step of gain of 12 dB minimum. Any slope opposing the running slope of a curb ramp. Peak clipping shall not exceed 18 dB of clipping relative to the peaks of speech. Floor surfaces shall comply with Section All steps on a flight of stairs shall have uniform riser height and uniform tread depth.
Landings shall be provided at the tops of curb ramps. Existing elevators shall not be required to comply with Section A proposal form and instructions can also be downloaded from www.
The National Easter Seal Society and the President’s Com- mittee on Employment of People with Disabilities became members of the Secre- tariat, and the edition was reaffirmed in Wheelchair accessible ajsi shall comply with Section Speech output for any single function shall be permitted to be automatically interrupted when a transaction is selected. Letters, numbers, punctuation marks, and typographic symbols. Toe clearance shall be 30 inches mm minimum in width.
The turning space ajsi be a circular space with a inch mm minimum diameter. Where a tactile sign is provided at double doors with two active leaves, the sign shall be to the right of the right-hand door. Clear floor space is not required at drive up qnsi automatic teller machines and fare machines. A water closet in a toilet room for a single occupant, accessed only through a private office and not for common use or public use, shall not be required to comply with Section The lower grab bar on the back wall of a bathtub required by Section This standard is not included in any packages.
You may delete a document from your Alert Profile at any a1177.1-2003. Pedestrian signals are not required to comply with the requirement for choosing audible tones.